The Enhanced Eclipse® Model 705 is a 24 VDC loop-powered transmitter based upon the revolutionary guided wave radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%.
The ECLIPSE guided wave radar transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.
Micropower impulse radar (MIR) combines time domain reflectometry (TDR), equivalent time sampling (ETS), and modern low power circuitry. This synthesis of technologies creates a high-speed Guided Wave Radar (GWR) transmitter. The electromagnetic pulses are propagated via a waveguide that focuses the energy and yields a system many times more efficient than Non-Contact Radar.
- Low dielectric measurement capability (εr ≥ 1.4)
- Volumetric output
- Quick connect / disconnect probe coupling
- Operates in visible vapors and ignores most foams
- IS, XP, and Non-Incendive approvals
- Ignores coating buildup
Guided Wave Radar Probes
Choosing the proper guided wave radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today, each with specific strengths and weaknesses.
Single element GWR probes act quite differently from coaxial and twin element designs. The pulses of energy develop between the center rod and the mounting nut or flange; the pulse propagates down the rod as it references its ground at the top of the tank. The efficiency of the pulse "launch" is directly related to how much metallic surface exists around it at the top of the vessel.
Signal transmission can be significantly improved by placing a single rod inside of a bridle or chamber.
The ECLIPSE guided wave radar transmitter is based upon the technology of TDR (time domain reflectometry). TDR utilizes pulses of electromagnetic energy transmitted down a wave guide (probe). When a pulse reaches a liquid surface that has a higher dielectric constant than the air (εr = 1) in which it is traveling, a portion of the pulse is reflected. The transit time of the pulse is then measured via high speed timing circuitry that provides an accurate measure of the liquid (or solids) level. Discover more guide wave radar products.
|ATEX||Ex d, Ex ia, Ex n, Ex t|
|CCOE||Ex d, Ex ia|
|CSA||XP, IS, NI|
|FM||XP, IS, NI|
|EAC (GOST)||Ex d, Ex ia, Metrology|
|IEC||Ex d, Ex ia|
|Inmetro||Ex d, Ex ia,|
|Korea||Ex d, Ex ia,|
|SIL||SIL 1/2 (1oo1)|
|Marine||Lloyd's Register of Shipping (LRS)|
|Steam Drum||Lloyds EN 12952-11 (water tube boilers)
Lloyds EN 12953-9 (shell boilers)
|TÜV / DIBt||WHG § 63, overfill prevention|
Other approvals are available. Consult factory for more details.