- Integrated Eclipse® GWR
- Broad range of chamber styles
- Precision manufactured float
Series B73 and series 75
- Carbon steel or stainless steel welded float chamber
- Choice of switch mechanism
- Choice of tank connection
Some hydroelectric power plants can operate in two different modes: generator mode or synchronous condenser mode. In generator mode, the turbine and the generator are coupled together to generate electricity and send it to the grid for distribution. In synchronous condenser mode, also referred to as Dynamic Power Factor Correction Systems, the turbine and generator are decoupled from each other and the generator now acts as a condenser able to produce or consume reactive power to adjust or compensate for rapid power fluctuations in the electrical grid. To achieve synchronous condenser operation, compressed air is used to lower the water level in the draft below the runner. The high-pressure water used to drive the unit as a generator is shut off, and the circuit breaker connecting it to the utility's electrical grid remains closed still providing a direct connection to the grid. To keep the power consumption of the turbine-generator at a minimum it is necessary to ensure that the turbine is spinning in air above the water level of the draft tube at all times. The turbine elevation is often below the river or tailrace level. In this situation, air pressure in the turbine cavity must be established and maintained at all times during condensing operation. This air pressure will gradually dissipate because of packing leakage. Therefore, after the initial establishment of the air cushion in the turbine cavity, it must be periodically replenished with more air.
Water levels in the draft tube are controlled using mechanical switches while the compressed air supply is monitored and controlled using our Thermatel TA2 thermal mass flowmeter.